< Back ×
My Vehicle Change Vehicle
2004 Cadillac Seville
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2004 Cadillac Seville Pad Asm-Pass Seat Cushion
PartNumber: 16806429
Product Specifications- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 50.5 x 23.3 x 5.6 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: Pad Asm-Pass Seat Cushion
OEM (Genuine) 2004 Cadillac Seville Pad Asm-Pass Seat Cushion
PartNumber: 16806428Product Specifications- Location: Passenger Side
- Other Names: Seat Cushion Pad
- Item Weight: 2.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: Pad Asm-Pass Seat Cushion
FAQ for Seat Cushion Pad Repair
Q: How do you remove the seat back cover and pad?
A:
You can remove the seat back, the pass-through pocket and the hog rings retaining the seat back cover to the seat frame, and pull the seat back cover and the cushion from the frame.
By Bob
GM Specialist
02/11/2022Q: How do you install the seat back cover and pad?
A:
You can position the foam cushion on the frame, press the seams down to engage the hook and loop, work the cover edges over the foam cushion, install the hog rings to retain the cover, install the pass-through pocket to the seat back and install the seat back.
By Bob
GM Specialist
02/11/2022Q: What is the installation procedure for the seat cushion cover and pad?
A:
You should install the seat cushion foam to the seat cushion frame, position the seat cushion cover over the foam cushion, work the cover over the foam cushion and engage the cover J channels to the seat cushion frame, install the screws to retain the J channels, install the rear seat cushion.
By Bob
GM Specialist
01/11/2022Q: How do you install the rear seat cushion?
A:
You can install the rear seat cushion into the vehicle, connect the heated seat electrical connectors, engage two locator tabs into the wire loops in the bottom of the rear seat back and push down and rearward to seat the rear seat cushion into the latches in the number four bar.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the rear seat cushion?
A:
You can push in and up on the front of the rear seat cushion, lift up and out on the seat cushion and disconnect heated seat electrical connectors. Remove the rear seat cushion from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What will need to be disabled when servicing the seat cushion cover?
A:
You will need to disable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the seat cushion cover and pad?
A:
You can remove the rear seat cushion, remove the screws from the J channels and disengage the seat cushion cover J channels from the seat cushion frame, remove the seat cushion cover and seat cushion foam.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the seat cushion cover?
A:
You should install the seat cushion pad, install the seat cushion cover onto the seat cushion foam, install the seat cushion cover J channels to the seat cushion frame, cut the hole for the seat switches, install the seat cushion assembly and enable the SIR.
By Bob
GM Specialist
01/11/2022Q: What special tool will I need when servicing the front seat cushion?
A:
You will need a door trim pad clip remover.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when servicing the front seat cushion?
A:
The lumbar switch knob is part of the lumbar switch assembly. Do not remove the lumbar switch knob.
By Bob
GM Specialist
01/11/2022See more FAQs (5)