< Back ×
My Vehicle Change Vehicle
2004 Cadillac Seville
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2004 Cadillac Seville AC Relay
PartNumber: 13500114
Product Specifications- Notes: Seville; Gray; Seville
- Item Dimensions: 3.8 x 2.2 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12193606, 19115080, 15328866, 12135034, 15393412, 12088567, 12135170, 19116057
- Part Description: AC Relay
$9.55 MSRP:$20.04You Save: $10.49 (53%)
OEM (Genuine) 2004 Cadillac Seville Module, Blower Motor Control
PartNumber: 52480042
Product Specifications- Notes: Blower Control
- Other Names: Control Module, Module
- Item Dimensions: 6.6 x 4.3 x 4.2 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 52474881
- Part Description: Module, Blower Motor Control
FAQ for Hvac Control Module Repair
Q: What is the removal procedure for the HVAC Control Module?
A:
Carefully pry out on the top of the rear HVAC control. Remove the rear HVAC control from the center console/seat. Disconnect the electrical connector. Remove the rear HVAC control from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Blower Motor Control Processor?
A:
You should remove the sound insulator.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Steering Wheel HVAC Control Assembly?
A:
Connect the electrical connectors to the steering wheel control switch. Align the steering control switch engagement tabs to the steering wheel. Push in on the steering wheel control switch to secure the control switch to the steering wheel. Install the steering wheel inflatable restraint module. Enable the SIR.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the blower control module screw?
A:
The recommended torque is 1.4 N.m (12 lb in).
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the HVAC Control Module?
A:
You should remove the instrument panel center trim plate.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the blower control module retaining screw?
A:
The recommended torque is 1.4 N.m (12 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the HVAC control module retaining nuts?
A:
The recommended torque is 10 N.m (88 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the HVAC Control Module?
A:
Connect the rear HVAC control electrical connector. Install the control in the console bottom first. Push in at the top of the rear HVAC control to engage the control in the console/seat.
By Bob
GM Specialist
01/11/2022Q: What will need to be disabled when servicing the Steering Wheel HVAC Control Assembly?
A:
You will need to disable the SIR system.
By Bob
GM Specialist
01/11/2022See more FAQs (4)