Q: What is the removal procedure for the Accessory Power Receptacle?
A:
Remove the right console side trim panel. Disconnect the auxiliary power receptacle electrical connector. Unscrew the retainer from the receptacle. Slide the outlet from the trim panel.
By Bob
GM Specialist
29/10/2022
Q: What kind of special tool will I need when servicing the 12 Volt Accessory Power Receptacle?
A:
You will need a cigar lighter socket remover.
By Bob
GM Specialist
29/10/2022
Q: What should be done before servicing the 12 Volt Accessory Power Receptacle?
A:
You should remove the power receptacle fuse.
By Bob
GM Specialist
29/10/2022
Q: What is the installation procedure for the Accessory Power Receptacle?
A:
Slide the receptacle into the hole in the trim panel. Screw the retainer onto the receptacle. Connect the auxiliary power outlet electrical connector. Install the right console side trim panel.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How do you remove the starter motor?
A:
You can disconnect the battery negative cable, remove the intake manifold, disconnect the BAT cable from the Starter, disconnect the wire from the °S° terminal on the starter, remove the 2 starter motor mounting bolts and remove the starter motor.
Q: What should be done before servicing the Cruise Control Module?
A:
You should remove the cruise control cable before servicing the Cruise Control Module.
Q: What should be noticed when servicing the sunroof motor/actuator?
A:
Do not apply battery voltage to a new Sunroof Motor/actuator before installing the motor/actuator to the sunroof module assembly.