Q: What is the recommended torque for the generator mounting bolts?
A:
The recommended torque is 50 N.m. (37 lb-ft).
By Bob
GM Specialist
28/10/2022
Q: What should be noticed when servicing the Generator Cable?
A:
Always use replacement cables that are of the same type, diameter, and length as the cables that you are replacing. Always route the replacement cable the same way as the original cable.
By Bob
GM Specialist
28/10/2022
Q: What is the recommended torque for the generator output BAT terminal nut?
A:
The recommended torque is 12.5 N.m. (111 lb in).
By Bob
GM Specialist
28/10/2022
Q: What should be done before servicing the Generator?
A:
You should disconnect the battery negative cable.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: How do you remove the starter motor?
A:
You can disconnect the battery negative cable, remove the intake manifold, disconnect the BAT cable from the Starter, disconnect the wire from the °S° terminal on the starter, remove the 2 starter motor mounting bolts and remove the starter motor.
Q: What should you do after installing the right closeout insulator panel?