FAQ for Seat Heater Switch Repair
Q: What is the installation procedure for the heated seat switch in the front?
A:
You need to install the front seat heater switch assembly to the front trim panel, connect the electrical connector to the front seat heater switch assembly, and install the front trim panel.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for heated and cooled seat switches (Front-Platinum Models)?
A:
You need to remove the floor console bezel, the three retaining screws, and the switch assembly from the console bezel.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the retaining screw?
A:
The recommended torque is 1.6 Nm (14 lb in).
By BobGM Specialist
01/11/2022 Q: What should be noticed to eliminate unnecessary part replacement and comeback repairs?
A:
To eliminate unnecessary part replacement and comeback repairs, the appropriate diagnostic tables and aids found in the applicable manuals must be followed.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for heated and cooled seat switch (Front-Platinum Models)?
A:
You need to install the switch assembly to the bezel, the three retaining screws, and the floor console bezel.
By BobGM Specialist
01/11/2022 Q: What should technicians do when customers comment that occasionally the seat heater will not operate when activated?
A:
Technicians are to reprogram the driver seat module with an updated software calibration., and you should make sure your Tech 2(R) is updated with the latest software version.
By BobGM Specialist
01/11/2022 Q: What should we do when the seat heater will not operate when activated?
A:
You should connect technicians who are to reprogram the driver seat module with an updated software calibration.
By BobGM Specialist
01/11/2022 Q: What components does the seat heater of the driver door include?
A:
It includes a driver door, driver door module, outside rearview mirror, window motor-driver, memory/heated seat switch connector, door courtesy lamp-left front, driver door panel, memory/heated seat switch, and mini wedge(door jamb switch).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the heated seat switch in the front?
A:
You need to remove the front door trim panel, disconnect the electrical connector, release the retaining clips for the front seat heater switch assembly, and remove the front seat heater switch assembly.
By BobGM Specialist
01/11/2022 Q: Which part do the two buttons locate on the door heat?
A:
You should press the horizontal (RH) button to heat the entire seat, back and cushion. and press the vertical (LH) button to heat ONLY the seat back. the three light bars are an indicator of the level of heat selected for either the entire seat (horizontal button) or ONLY the seat back (vertical button).
By BobGM Specialist
01/11/2022 See more FAQs (8)