< Back ×
My Vehicle Change Vehicle
2004 Cadillac Escalade EXT
< Back to View All
Fuses & Fuse Box
- Department
- Prices
OEM (Genuine) 2004 Cadillac Escalade EXT Block, Engine Wiring Harness Junction
PartNumber: 15786043
Product Specifications- Other Names: Junction Block
- Item Dimensions: 9.5 x 5.3 x 12.2 inches
- Item Weight: 7.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15115617, 15201930, 15177119, 15095836
- Part Description: Block, Engine Wiring Harness Junction
$403.16 MSRP:$640.10You Save: $236.94 (38%)
FAQ for Relay Boxes Repair
Q: What is the installation procedure for the instrument panel electrical center or junction block on the left?
A:
You need to install the fuse block onto the I/P assembly, the wire harness block to the back of the fuse block, the bolt, the turn signal relay to the back of the fuse block, the fuses, the electrical connectors, the knee bolster, and the left side end panel.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the underhood electrical center or junction block?
A:
You need to disconnect the negative battery cable, remove the left fender upper brace, the electrical center brace cover assemble and all fuses and relays, push on the tab, remove all connectors, disconnect all connectors from the electrical center block, push on the tabs, and remove the 4 retaining bolts and the engine electrical center bracket assembly from the fender.
By Bob
GM Specialist
02/11/2022Q: What is the installation procedure for the body wiring harness junction?
A:
You need to install the wire harness block to the junction block, the retaining bolts, the junction block to the bracket, push on the top part, connect the harness to the front of the junction block, install the cover to the junction block, and hand tighten the retaining nut until seated.
By Bob
GM Specialist
02/11/2022Q: What is the installation procedure for the instrument panel electrical center or junction block on the right?
A:
You need to install the fuse block to the I/P wire harness block, the retaining bolt, and the fuse block to the I/P, connect the wiring connectors to the fuse block and install the right side end panel.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the body wiring harness junction?
A:
You need to remove the cover retaining nut, the cover by pushing in the tabs, the harness from the front of the junction block, and the junction block from the bracket, remove the junction block, and the retaining bolts, separate the wire harness block from the junction block and remove the junction block from the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the right instrument panel electrical center or junction block?
A:
You need to remove the right side end panel, push in the tabs, pull the fuse block out of the I/P, loosen the bolt, insert a screwdriver between the wire harness block and fuse block, separate the fuse block from the I/P harness block, and remove the I/P wiring harness block from the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the left instrument panel electrical center or junction block?
A:
You need to remove the left side end panel and the knee bolster, disconnect all the wiring connectors from the fuse block, remove all the fuses and the turn signal relay from the back of the fuse block and the retaining bolt, insert a screw driver between the fuse block and the wire harness block to separate, push on the retainers, and remove the fuse block from the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the wire connectors with the bolts to the electrical center block?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
02/11/2022See more FAQs (3)