FAQ for Power Steering Hose Repair
Q: What is the removal procedure for the power steering gear inlet pipe/hose (With Hydroboost)?
A:
You need to install a drain pan under the vehicle, remove the power steering gear inlet hose from the brake booster, the power steering gear inlet hose from the power steering gear, and remove the power steering gear inlet hose from the vehicle.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the power brake booster outlet hose?
A:
You need to install a drain pan under the vehicle, remove the brake booster outlet hose from the brake booster and the clamp retaining the brake booster outlet hose to the power steering pump, and remove the brake booster outlet hose from the vehicle.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the power brake booster inlet hose?
A:
You need to install a drain pan under the vehicle and remove the brake booster inlet hose from the brake boosters, from the power steering pump, and the vehicle.
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for the power steering gear inlet hose fittings?
A:
The recommended torque is 28 Nm (20 ft. lbs.).
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for the outlet hose fitting?
A:
The recommended torque is 28 Nm (20 ft. lbs.).
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for the bolts retaining the power steering cooler?
A:
The recommended torque is 5 Nm (44inch lbs.).
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the power steering gear inlet pipe/hose (With Hydroboost)?
A:
You need to raise the vehicle, remove the engine protection shield, install a drain pan under the vehicle, and remove the power steering gear inlet hose from the power steering pump from the power steering gear and the vehicle.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the power steering gear outlet pipe/hose (Recirculating Ball)?
A:
You need to install a drain pan under the vehicle, remove the power steering gear outlet hose from the steering gear, the clamp retaining the power steering gear outlet hose to the power steering pump, and remove the power steering gear outlet hose from the power steering pump and the power steering gear outlet hose from the vehicle.
By BobGM Specialist
02/11/2022 Q: What is the installation procedure for the power brake booster inlet hose?
A:
You need to route the hose in the same position the hose occupied prior to removal, install the brake booster inlet hose to the brake booster and the power steering pump, remove the drain pan from under the vehicle, and bleed the power steering system.
By BobGM Specialist
02/11/2022 Q: What should be noticed when installing the power brake booster outlet hose?
A:
The inlet and outlet hoses must not be twisted during installation. You should not bend or distort the inlet or outlet hoses to make installation easier.
By BobGM Specialist
02/11/2022 See more FAQs (6)