2004 Cadillac Escalade EXT Parking Brake Shoe

You should install the park brake shoe assembly to the vehicle by placing one of the open ends of the shoe over the axle flange and rotating the shoe until it is behind the flange.

You need to set the J21177-A so that it contacts the inside diameter of the rotor, position the J21177-A over the shoe and the lining at the widest point, turn the adjuster nut until the lining just contacts the J211 77-A, repeat steps for the opposite side.

You need to raise and support the vehicle, remove the tire and the wheel, relieve the tension from the park brake cable, remove the park brake cable from the park brake actuator lever, remove the rotor, turn the adjustment screw to the full home position in the notched adjustment nut, remove the park brake shoe assembly from the backing plate and the vehicle.

You should use J 46277 Rotor Removal Tool with J 6125-B Slide Hammer to remove the rotor from the vehicle. Place J 46277 between the rotor surfaces in the vent section of the rotor.