Part Description: Heater & Air Conditioner Control Assembly (W/R/Wdo Defg Sw)
More Info
FAQ for Blower Control Switches Repair
Q: What is the installation procedure for the auxiliary blower motor switch?
A:
You need to connect the electrical connector, install the blower motor switch to the overhead console, and install the overhead console to the headliner.
By Bob
GM Specialist
29/10/2022
Q: What is the removal procedure for the auxiliary blower motor switch?
A:
You need to remove the console from the headliner, remove the auxiliary blower motor switch by releasing the tabs at the rear of the overhead console, and disconnect the electrical connector.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the ambient temperature sensor?
A:
You need to install the ambient Air Temperature Sensor, connect it to the electrical connector, and install the park/turn signal.
Q: What is the removal procedure for the auxiliary blower motor resistor?
A:
You need to remove the right rear quarter trim panel, disconnect the electrical connector from the Blower Motor Resistor, and remove the retaining screws from the blower motor resistor and the blower motor resistor from the vehicle.
Q: What is the removal procedure for the heater core (Visteon)?
A:
You need to Remove the HVAC module assembly, the screws from the Heater Core cover, the heater core cover, the heater core cowl gasket, and the heater core.