< Back ×
My Vehicle Change Vehicle
2004 Cadillac Escalade EXT
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2004 Cadillac Escalade EXT AC Tube Seal
PartNumber: 13579648
Product Specifications- Item Dimensions: 1.3 x 1.4 x 0.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24436646, 52474373, 15232223
- Part Description: AC Tube Seal
$10.01 MSRP:$18.86You Save: $8.85 (47%)
Four Seasons® A C System O Ring And Gasket Kit for 2004 Cadillac Escalade EXT
PartNumber: 26824Product Specifications- Notes: O-Ring and Gasket Seal Kit
- Material: Green Rubber O-Rings, Black Aluminum Gasket
- Style: O-Ring & Gasket Kit
- UPC: 096361268241
- Part Description: A C System O Ring And Gasket Kit
$13.27
OEM (Genuine) 2004 Cadillac Escalade EXT SEAL, A/C Refrigerant Lines
PartNumber: 52474375
Product Specifications- Item Dimensions: 1.6 x 0.6 x 0.2 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24436645, 2724966, 31028254, 02724966
- Part Description: SEAL, A/C Refrigerant Lines
$12.61
FAQ for A/C System Seal Kit Repair
Q: What is the removal procedure for an O-ring?
A:
You need to disassemble the A/C refrigerant components, remove the O-ring seal from the A/C refrigerant component, and inspect the O-ring seal for signs of damage to help determine the root cause of the failure and the A/C refrigerant components for damage or burrs. You also need to repair if necessary and cap or tape the A/C refrigerant components, and discard the O-ring seal.
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the sealing washer?
A:
You need to remove the seal washer from the A/C refrigerant component, inspect the seal washer for signs of damage and the A/C refrigerant components for damage or burrs, and discard the sealing washer.
By Bob
GM Specialist
28/10/2022Q: What should be noticed when caping or taping the A/C refrigerant components?
A:
Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
By Bob
GM Specialist
28/10/2022Q: What should be noticed when installing an O-ring?
A:
DO NOT allow any of the mineral base 525 viscosity refrigerant oil on the new O-ring seal to enter the refrigerant system or reuse O-ring seals.
By Bob
GM Specialist
28/10/2022Q: What should be noticed when installing a sealing washer?
A:
Flat washer-type seals do not require lubrication.
By Bob
GM Specialist
28/10/2022Q: How much is the gap between the A/C line and the A/C component?
A:
After tightening the A/C components, there should be a slight sealing washer gap of approximately 1.2 mm (3/64 in) between the A/C line and the A/C component.
By Bob
GM Specialist
28/10/2022See more FAQs (1)