< Back ×
My Vehicle Change Vehicle
2004 Cadillac Escalade EXT
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2004 Cadillac Escalade EXT Drier
PartNumber: 19130063
Product Specifications- Notes: All Models; 4.8l, 5.3l, 6.0l; W/O Auxiliary AC
- Other Names: Accumulator, Drier
- Item Dimensions: 13.1 x 7.8 x 7.6 inches
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1132822, 2724986, 89018423, 02724986, 01132822
- Part Description: Drier
$37.61 MSRP:$70.98You Save: $33.37 (48%)
Four Seasons® A C Accumulator for 2004 Cadillac Escalade EXT
PartNumber: 83221Product Specifications- Notes: w/ Rear AC
- Body Diameter: 3.500
- Body Length: 9.000
- Dia. MM: 88.900
- Inlet Fitting Diameter: 3/4
- Inlet Fitting Type: P-Nut Fitting
- Length MM: 228.600
- Material: Aluminum
- Meets / Exceeds OEM: Yes
- Mounting Hardware: Hardware not included.
- O-Ring A Number/Desc: [24676] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24404] / Slimline Washer
- O-Ring B Quantity: 2
- Outlet Fitting Type: P-Nut Fitting
- Outlet Fraction: 3/4
- Outlet Thread Size: M8x1.500
- Style: Complete Unit
- Switch: w/ Switch Port
- Switch Port Dia. IN: 0.472
- Switch Port Dia.MM: 12.000
- Switch Service Port: w/o Service Port
- UPC: 096361832213
- Part Description: A C Accumulator
$21.37
OEM (Genuine) 2004 Cadillac Escalade EXT Drier
PartNumber: 19130064
Product Specifications- Notes: All Models; 4.8l, 5.3l, 6.0l; W/Auxiliary AC; 2nd Design
- Other Names: Accumulator, Drier
- Item Dimensions: 13.4 x 7.8 x 7.7 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1132781, 19169380, 89018424, 01132824, 01132781, 01132786, 1132824, 1132786
- Part Description: Drier
$45.71 MSRP:$86.26You Save: $40.55 (48%)
Four Seasons® Accumulator for 2004 Cadillac Escalade EXT
PartNumber: 83208Product Specifications- Notes: w/o Rear AC
- Body Diameter: 3.500
- Body Length: 8.000
- Dia. MM: 88.900
- Inlet Fitting Diameter: 3/4
- Inlet Fitting Type: P-Nut Fitting
- Length MM: 203.200
- Material: Aluminum
- Meets / Exceeds OEM: Yes
- Mounting Hardware: Hardware not included.
- O-Ring A Number/Desc: [24676] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24404] / Slimline Washer
- O-Ring B Quantity: 2
- Outlet Fitting Type: P-Nut Fitting
- Outlet Fraction: 3/4
- Style: Complete Unit
- Switch: w/ Switch Port
- Switch Port Dia. IN: 0.472
- Switch Port Dia.MM: 12.000
- Switch Service Port: w/o Service Port
- UPC: 096361832084
- Part Description: Accumulator
$21.91
FAQ for A/C Accumulator Repair
Q: What defects should be inspected for the 1-2 accumulator piston?
A:
The porosity, cracks, scoring, nicks, and scratches.
By Bob
GM Specialist
01/11/2022Q: What is the disassembly procedure for the 1-2 accumulator?
A:
You need to blow compressed air into the 1-2 accumulator cover to remove the 1-2 accumulator piston and remove the 1-2 accumulator inner and outer springs.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the accumulator?
A:
You need to remove the refrigerant, the evaporator tube nut from the evaporator, the evaporator tube from the evaporator, and the nut from the evaporator tube, and disconnect the electrical connector from the A/C low-pressure switch. You also need to remove the compressor hose nut from the accumulator, the compressor hose from the accumulator, the nut from the evaporator fitting, the accumulator bracket nut from the retaining stud, the accumulator, the retaining bracket bolt, the retaining bracket from the accumulator, and discard the O-ring seals.
By Bob
GM Specialist
01/11/2022Q: What is the recommended bolt torque for the nut to the evaporator tube?
A:
The recommended bolt torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when removing the spacer plate?
A:
Important: Use care not to drop the number 1 check ball, the 3-4 accumulator spring, and the 3-4 accumulator pin that will be removed along with the spacer plate.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when removing the accumulator housing?
A:
Apply low-pressure compressed air to the hole at the top of the accumulator housing to assist with the piston removal.
By Bob
GM Specialist
01/11/2022Q: What is the recommended bolt torque for the accumulator housing bolts?
A:
The recommended bolt torque is 11 Nm (97inch lbs.).
By Bob
GM Specialist
01/11/2022See more FAQs (2)