Wiper Blade Connection Type: Nine by Three and Nine by Four Hooks
Part Description: 2004 Cadillac DeVille 22" Black Beam Style Wiper Blade
More Info
Vehicle Fitment
2004 Cadillac DeVille | All Trims | All Engines
FAQ for Wiper Blade Repair
Q: What is the removal procedure for the wiper arm blade?
A:
The procedure is to push the button of the wiper blade clip, remove the wiper blade from the inside radius of the wiper arm, and bring the wiper arm out through the opening in the wiper blade.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the wiper blade element?
A:
The procedure is to insert the open end of the wiper blade element into the bottom claws of the wiper blade, engage the bottom claw of the wiper blade into the notches in the wiper blade element, and install the wiper blade onto the wiper arm.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to clean the Blade Element?
A:
The proper way is to lift each blade assembly off of the windshield, clean the element with a cloth saturated with full-strength washer solvent, and then rinse the blade assemblies with clear water.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the wiper arm blade?
A:
The procedure is to insert the hook of the wiper arm through the opening in the wiper blade, position the wiper blade pivot in the inside radius of the wiper arm hook, and pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
By Bob
GM Specialist
01/11/2022
Q: How to remove the wiper blade element?
A:
You shall remove the wiper blade from the wiper arm and the bottom claws of the wiper blade from the notches in the wiper blade element, and pull the wiper blade element out through the wiper blade claws.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the washer pump?
A:
The proper way is to install the Washer Pump in the washer solvent container, connect the electrical connector and the washer hose to the washer pump, and install the right front fascia extension.
Q: What is the proper way to install the Washer Solvent Container Level Sensor?
A:
The proper way is to install the new washer solvent container level sensor grommet, the level sensor, and the right front fascia extension.
Q: What is the removal procedure for the Windshield Outside Moisture Sensor?
A:
The procedure is to connect the electrical connector and install the rain sensor module and the trim cover.