Part Description: 2004 Cadillac DeVille Switch Asm-Driver Seat Adjuster Memory
More Info
Vehicle Fitment
2004 Cadillac DeVille | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
FAQ for Window Switch Repair
Q: What is the removal procedure for the power window switch-rear door?
A:
The procedure is to disengage the retainer, remove the rear switch plate, disconnect the electrical connector, and remove the power window switch.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the power window switch-rear door?
A:
The proper way is to snap the power window switch into the switch plate, connect the electrical connectors, and install the switch plate.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the window regulator-rear door (RPO WC2 and WC8)?
A:
You shall remove the door trim panel, the door module, the water deflector, the door glass, the front and rear run channels, and the Window Regulator.
Q: What should be noticed while servicing the Rear Window Reveal Molding?
A:
The rear window reveal molding may be replaced with a rear window as an assembly, or the rear window revealed molding may be available as a separate service part.
Q: What is the proper way to program the window motor?
A:
The proper way to press and hold the power window switch until the window is fully DOWN, continue holding the switch for approximately 3 seconds, press and hold the switch until the window is fully UP, continue holding the switch for approximately 3 seconds, and the power window regulator motor is now programmed for the express function.