FAQ for Window Regulator Repair
Q: How to remove the window regulator-rear door (RPO WC2 and WC8)?
A:
You shall remove the door trim panel, the door module, the water deflector, the door glass, the front and rear run channels, and the window regulator.
By BobGM Specialist
01/11/2022 Q: What is the proper way to install the window regulator-rear door (standard door)?
A:
The proper way is to install the window regulator, the window, the inside handle assembly, the water deflector, the door module, and the door trim panel.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the window regulator-rear door (standard door)?
A:
The procedure is to remove the door trim panel, the door module, the water deflector, the inside handle assembly, and the window regulator.
By BobGM Specialist
01/11/2022 Q: What is the proper way to install the window regulator-front door (RPO WC2 and WC8)?
A:
The proper way is to install the window regulator, the front run channel, the rear run channel, the door, the water deflector, the door module, and the door trim panel.
By BobGM Specialist
01/11/2022 Q: What should be learned about before removing the window regulator-front door?
A:
When the battery or the power has been removed from the front door module, the front door module will need to be reprogrammed after power is restored and all repairs are completed.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the window regulator-rear door?
A:
The procedure is to remove the door trim panel, the door module, the water deflector, the inside handle assembly, and the window regulator.
By BobGM Specialist
01/11/2022 Q: What should be noticed while installing the window regulator-front door?
A:
You shall ensure that the rubber insulators are properly attached to the window regulator clamps.
By BobGM Specialist
01/11/2022 Q: What is the proper way to install the window regulator-rear door?
A:
The proper way is to install the window regulator, the window, the inside handle assembly, the water deflector, the door module, and the door trim panel.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the window regulator-front door (standard door)?
A:
The procedure is to remove the door trim panel, the door module, the water deflector, the inside handle assembly, and the window regulator.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the window regulator-front door (standard door)?
A:
The procedure is to install the window regulator, the inside handle assembly, the water deflector, the door module, and the door trim panel.
By BobGM Specialist
01/11/2022 See more FAQs (7)