Part Description: 2004 Cadillac DeVille Brace-Trans
More Info
Vehicle Fitment
2004 Cadillac DeVille | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
FAQ for Transmission Mount Repair
Q: What is the installation procedure for the rear automatic transmission mount?
A:
The procedure is to install the mount, bolts, and nuts.
By Bob
GM Specialist
01/11/2022
Q: What should be noticed before inspecting the transmission mount?
A:
Before replacing any transmission/transaxle mount due to suspected fluid loss, you shall verify that the source of the fluid is the transmission/transaxle mount, not the engine, transmission/transaxle, or accessories.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the rear automatic transmission mount?
A:
The procedure is to remove the nuts securing the transmission mount to the transmission mount bracket, the bolts, and 1 nut securing the mount to the frame, and mount.
By Bob
GM Specialist
01/11/2022
Q: Under what kinds of conditions should you replace the transmission/transaxle mount?
A:
The hard rubber surface is covered with heat check cracks. The rubber is separated from the metal plate of the transmission/transaxle mount. the rubber is split through the center of the transmission/transaxle mount.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noticed while serving the bottom pan seal?
A:
The bottom pan seal is reusable. You shall replace it with a new seal only if the sealing surface is damaged.
Q: What is the removal procedure for the Transmission Fluid Cooler Hose/Pipe?
A:
The procedure is to remove the retaining ring and the cooler line.
Q: What should be noticed while removing the Shift Lever?
A:
The shift lever seal must be removed by sliding the shift lever seal towards the narrow section of the shift lever.