Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
Hose Port: O-Ring
Housing Material: Aluminum
Import or Domestic: Domestic
Mounting Hardware: Without
Power Steering Reservoir Cap: Without
Pulley: Without
Pulley Attachment Type: Press-on
Pump Inlet Attachment Type: Hose Barb
Pump Outlet Attachment Type: Threaded
Reservoir: Without
Thread Size: M16 x 1.5
Part Description: 2004 Cadillac DeVille Remanufactured Power Steering Pump w/o Reservoir
Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;without Aftermarket Filtration Improvement;Supplied w/Reservoir
Aftermarket Filtration: Without
Attribute: With Reservoir
Hose Port: O-Ring
Housing Material: Cast Iron
Import or Domestic: Domestic
Mounting Hardware: Without
Power Steering Reservoir Cap: Without
Pulley: Without
Pulley Attachment Type: Press-on
Pump Inlet Attachment Type: Hose Barb
Pump Outlet Attachment Type: Threaded
Thread Size: M16 x 1.5
Part Description: 2004 Cadillac DeVille Remanufactured Power Steering Pump w/Reservoir
Notes: Pulley needs to be transferred w/proper pulley removal/install toll.
UPC: 884109784043
Part Description: 2004 Cadillac DeVille Remanufactured Power Steering Pump
More Info
Vehicle Fitment
2004 Cadillac DeVille | All Trims | All Engines
FAQ for Power Steering Pump Repair
Q: What is the proper way to install the power steering pulley?
A:
The proper way is to install the power steering pulley, the drive belt, the surge tank, and the secondary AIR relay bracket.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to disassemble the power steering pump?
A:
The proper way is to inspect the hydraulic pump for leaks and remove the reservoir assembly if the pump needs replacement.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the power steering pump?
A:
The proper way is to install the power steering reservoir, the power steering pulley, the power steering pump, the power steering pressure hose, the power steering return hose, and the drive belt.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the power steering pulley?
A:
The procedure is to remove the secondary AIR relay bracket, the drive belt, and the power steering pump pulley.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the power steering pump?
A:
The procedure is to remove the power steering pressure hose, the power steering pulley, and the power steering reservoir.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the intermediate steering shaft?
A:
The procedure is to remove the steering column, the left front tire, and the intermediate Steering Shaft.
Q: What should be learned about before removing the hydraulic brake booster?
A:
Hydraulic brake systems use two distinct and incompatible fluids. Power steering fluid is used in the hydraulic Brake Booster system. Brake fluid is used in the master cylinder and brake pipes. You shall use extreme care when selecting brake system fluids, or seal damage can result.
Q: What should be noticed while installing the front brake hose?