Part Description: 2004 Cadillac DeVille Handle Asm-Front Side Door Inside
More Info
Vehicle Fitment
2004 Cadillac DeVille | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
FAQ for Interior Door Handle Repair
Q: What is the proper way to install the Assist Handle?
A:
The proper way is to install the coathook, the 2 screws, and the 2 escutcheons.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Door Handle-Rear Inside?
A:
The proper way is to install the inside door handle, the three inside door handle fasteners, and the rear door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Front Inside Door Handle?
A:
The procedure is to remove the front door trim panel and the inside door handle.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Front Inside Door Handle?
A:
The proper way is to install the inside door handle, the 3 inside door handle fasteners, and the front door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Assist Handle?
A:
The procedure is to release both assist strap escutcheons, and remove the 2 screws, the coathook, and the assist strap.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to remove the Door Handle-Rear Inside?
A:
The proper way is to remove the rear door trim panel, the three fasteners, and the inside door handle.
By Bob
GM Specialist
01/11/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: What is the proper way to remove the Front Door Check Link?
A:
The proper way is to remove the door trim panel, the door module, the door module, the Door Check link cover, and the check link.
Q: How to remove the Front Door Latch?
A:
You shall remove the door trim panel, the door module, the water deflector, the inside handle assembly, and the Door Latch Assembly, and disconnect the electrical connectors and the inside handle rod.
Q: What is the proper way to install the power door lock switch?
A:
The proper way is to snap the Door Lock Switch into the door trim panel, connect the electrical connector, and install the door trim panel.