FAQ for Brake Booster Repair
Q: What is the installation procedure for the hydraulic brake booster accumulator?
A:
The procedure is to install the accumulator, the O-ring seal, the accumulator retainer ring, and the master cylinder.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the brake pedal assembly to booster stud mounting nuts?
A:
It is 36 N.m (27 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the hydraulic brake booster accumulator?
A:
The procedure is to remove the master cylinder, the accumulator retainer ring, the accumulator, and the O-ring seal.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for booster stud mounting nuts?
A:
It is 36 N.m (27 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: What should be learned about before removing the hydraulic brake booster?
A:
Hydraulic brake systems use two distinct and incompatible fluids. Power steering fluid is used in the hydraulic brake booster system. Brake fluid is used in the master cylinder and brake pipes. You shall use extreme care when selecting brake system fluids, or seal damage can result.
By BobGM Specialist
01/11/2022 Q: What should be removed to get access to the vacuum brake booster?
A:
You shall remove the air cleaner assembly.
By BobGM Specialist
01/11/2022 See more FAQs (1)