FAQ for Alternator Repair
Q: What is the proper way to install the Auxiliary Generator Bracket?
A:
The proper way is to install the auxiliary generator bracket, the power steering pump pulley, and the auxiliary generator.
By BobGM Specialist
28/10/2022 Q: What is the removal procedure for the Generator?
A:
The procedure is to install the generator, connect the wiring harness connector and the battery positive lead, and install the radiator and the drive belt.
By BobGM Specialist
28/10/2022 Q: How to remove the Generator Cable?
A:
You shall remove the upper filler panel and the intake manifold, disconnect the starter motor BAT terminal wire, the positive lead, and the cable harness clips, and remove the generator cable.
By BobGM Specialist
28/10/2022 Q: What is the removal procedure for the Auxiliary Generator Bracket?
A:
The procedure is to remove the auxiliary generator, the power steering pump pulley, and the auxiliary generator bracket.
By BobGM Specialist
28/10/2022 Q: How to install the Generator Cable?
A:
You shall position the generator cable to the engine, connect the battery positive lead, the cable harness clips, and the starter motor BAT terminal wire, install the intake manifold and the upper filler panel, and connect the battery negative cable.
By BobGM Specialist
28/10/2022 Q: What should be learned about while removing the Auxiliary Generator?
A:
There are 3 shims located between the auxiliary generator and the front of the auxiliary generator bracket.
By BobGM Specialist
28/10/2022 Q: What should be noticed while installing the Auxiliary Generator?
A:
You shall ensure that the overflow hose is properly routed through the retainer.
By BobGM Specialist
28/10/2022 Q: How to remove the Generator?
A:
You shall remove the drive belt and the radiator, disconnect the wiring harness connector and the positive lead, and remove the generator.
By BobGM Specialist
28/10/2022 See more FAQs (3)