Part Description: 2004 Cadillac DeVille Panel Air Element
Vehicle Fitment
2004 Cadillac DeVille | All Trims | 8 Cyl 4.6L
FAQ for Air Filter Repair
Q: What is the proper way to install the Air Cleaner Element?
A:
The proper way is to install the new air cleaner element, the air cleaner housing cover, and the intake air duct, and connect the MAF/IAT sensor electrical connector.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to remove the Air Cleaner Element?
A:
The proper way is to disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector and the IAT sensor and remove the air cleaner cover and the air filter element.
By Bob
GM Specialist
01/11/2022
Q: What should be noticed while installing the Automatic Level Control Air Compressor Air Filter?
A:
Before driving the vehicle, you shall turn the ignition on and wait approximately 45 seconds.
By Bob
GM Specialist
01/11/2022
Q: What should be noticed while removing the Automatic Level Control Air Compressor Air Filter?
A:
Before disconnecting the air hose from the intake air filter or the air compressor, you shall clean the components and the surrounding area.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noticed before installing the throttle body assembly?
Q: What is the removal procedure for the manifold absolute pressure (MAP) sensor?
A:
The procedure is to disconnect the MAP Sensor electrical connector, and remove the accelerator control cable bracket bolt and bracket, and the MAP sensor.
Q: What should be noticed while installing the intake manifold?
A:
You shall ensure the PCV valve hose is firmly connected to the fitting at the front of the Intake Manifold, before installation.