Part Description: 2004 Cadillac CTS Bracket-Trans Rear Mount
More Info
Vehicle Fitment
2004 Cadillac CTS | Base, Luxury, Luxury Sport | 6 Cyl 3.2 L GAS
FAQ for Transmission Mount Repair
Q: What should be done for transmission mount inspection?
A:
The procedure is to raise the transmission/transaxle to remove the weight from the transmission/transaxle mount and create slight tension in the rubber, observe the transmission/transaxle mount while raising the transmission/transaxle, replace the transmission/transaxle mount, lower the transmission/transaxle on the transmission/transaxle mount, and then tighten the bolts or nuts attaching the transmission/transaxle mounts to the frame or transmission/transaxle mount bracket.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the transmission mount?
A:
The proper way is to install the transmission mount and upper mounting bolts, tighten the mount bolts to 60 Nm (44 ft. lbs.), install the transmission support, and then lower the vehicle.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the transmission mount?
A:
The procedure is to raise and support the vehicle, remove the transmission support, remove the transmission mount upper mounting bolts, and then remove the transmission mount.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the automatic transmission fluid/filter?
A:
The procedure is to place a suitable drain pan under the transmission fluid drain plug, remove and discard the transmission fluid drain plug, and remove the fluid pan bolts, the fluid filter, and the 2 fluid filter seals.
Q: What is the removal procedure for the transmission fluid cooler hose/pipe?
A:
The procedure is to remove the front air deflector, the wiring harness retainer, the transmission fluid cooler pipes, the O-rings, the fluid cooler pipe assembly, and the transmission fluid inlet pipe.
Q: What is the removal procedure for the auxiliary automatic transmission (AT) oil cooler?
A:
The procedure is to remove the front air deflector, disconnect the auxiliary transmission cooler inlet line, disconnect the auxiliary transmission cooler outlet line, remove the auxiliary transmission oil cooler mounting bolts, and then remove the auxiliary transmission oil cooler.