< Back ×
My Vehicle Change Vehicle
2004 Cadillac CTS
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2004 Cadillac CTS Cushion Asm, Rear Seat
PartNumber: 88896778
Product Specifications- Notes: W/O Folding Seat
- Other Names: Seat Cushion Pad
- Item Dimensions: 59.9 x 22.7 x 7.8 inches
- Item Weight: 12.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Cushion Asm, Rear Seat
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
FAQ for Seat Cushion Pad Repair
Q: What is the removal procedure for the front seat cushion?
A:
The procedure is to disable the SIR System, remove the retaining nuts securing the seat cushion to the seat adjuster assembly, remove the power seat switches, disconnect the wiring harness fastener and retainers securing the wiring harness to the bottom of the seat cushion frame, and then pull the cushion forward to remove the seat cushion from the seat adjuster assembly.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the front seat cushion cover and pad?
A:
The proper way is to install the seat cushion pad to the seat cushion frame, install the seat cushion cover over the seat cushion pad, install the seat cushion cover J channels to the seat cushion frame, and then install the seat cushion to the seat assembly.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the seat cushion?
A:
The proper way is to insert the seat cushion locator, install the power seat switches, install the seat cushion nuts, and then enable the SIR.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the rear seat cushion?
A:
The procedure is to push in and pull up on the front of the rear seat cushion, lift up and out on the seat cushion, and then remove the rear seat cushion from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the rear seat cushion cover and pad?
A:
The procedure is to remove the rear seat cushion and then remove the seat cushion cover and the seat foam from the rear seat bottom frame.
By Bob
GM Specialist
01/11/2022Q: How to remove the rear seat cushion?
A:
You should push in and pull up on the front of the rear seat cushion, lift up and out on the seat cushion, and then remove the rear seat cushion from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the front seat cushion cover and pad?
A:
The procedure is to remove the seat cushion from the seat assembly, remove the seat cushion cover, and then remove the seat cushion pad.
By Bob
GM Specialist
01/11/2022Q: How to install the rear seat cushion?
A:
You should install the rear seat cushion into the vehicle, engage the center wire hook, on the back of the seat cushion, under the seat back frame, position the rear seat buckles in the slots of the rear seat cushion, and then push down and rearward to seat the rear seat cushion into the latches in the number 4 bar.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the rear seat cushion?
A:
The proper way is to install the rear seat cushion into the vehicle, engage the center wire hook, on the back of the seat cushion, under the seat back frame, position the rear seat buckles in the slots of the rear seat cushion, and then push down and rearward to seat the rear seat cushion into the latches in the number 4 bar.
By Bob
GM Specialist
01/11/2022Q: How to install the rear seat cushion cover and pad?
A:
You should position the seat cushion cover over the seat cushion foam pad, install the hog rings holding the rear seat cushion cover to the foam pad, in the ditches on the foam pad, install the seat cushion to the seat cushion frame, and then install the rear seat cushion.
By Bob
GM Specialist
01/11/2022See more FAQs (7)