< Back ×
My Vehicle Change Vehicle
2004 Cadillac CTS
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2004 Cadillac CTS Adjust Switch
PartNumber: 10315826
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Adjust Switch, Lumbar Switch, Switch
- Item Dimensions: 2.8 x 1.9 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25928038
- Part Description: 2004 Cadillac CTS Adjust Switch
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
$29.96 MSRP:$45.19You Save: $15.23 (34%)
OEM (Genuine) 2004 Cadillac CTS Seat Switch
PartNumber: 12450263
Product Specifications- Location: Driver Side
- Other Names: Seat Switch, Switch
- Item Dimensions: 5.9 x 3.4 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Seat Switch
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2004 Cadillac CTS Switch, Passenger Seat Reclining
PartNumber: 12450264
Product Specifications- Location: Passenger Side
- Other Names: Adjuster Switch, Seat Switch, Switch
- Item Dimensions: 6.2 x 3.3 x 3.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Switch, Passenger Seat Reclining
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
FAQ for Power Seat Switch Repair
Q: What is the proper way to install the power seat switch?
A:
The proper way is to install the wiring harness in the position in which it was removed, install the push-in fastener to secure the power seat switch to the seat cushion frame, install the seat cushion cover over the switch, install the power seat switch knobs, and then install the seat cushion.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the power seat switch?
A:
The procedure is to remove the seat cushion from the adjuster track enough to gain access to the power seat switch, remove the knobs from the switch by gently prying them off using a flat-bladed tool, remove the power seat switch bezel, and then remove the push-in fastener securing the power seat switch to the seat cushion frame.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the memory seat switch?
A:
The procedure is to insert a flat-bladed tool under the front edge of the switch to release the retainer from the door trim panel, disconnect the electrical connector from the lock switch, disengage the locking tabs from both sides of the switch, and then remove the lock switch.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the memory seat switch?
A:
The proper way is to snap the door lock switch into the door switch bezel, connect the electrical connector, insert the rear of the door lock switch into the door trim panel, and then press down on the front of the door lock switch to engage the switch to the door trim panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the lumbar switch?
A:
You should remove the seat track trim cover from the seat, disconnect the lumbar switch electrical connector, and then remove the lumbar switch.
By Bob
GM Specialist
01/11/2022Q: How to install the lumbar switch?
A:
You should install the lumbar switch into the seat track trim cover, connect the electrical connector, and then install the seat track trim cover to the seat.
By Bob
GM Specialist
01/11/2022See more FAQs (1)