< Back ×
My Vehicle Change Vehicle
2004 Cadillac CTS
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
OEM (Genuine) 2004 Cadillac CTS Sensor, Fuel Tank Pressure
PartNumber: 16238399
Product Specifications- Notes: Tank Pressure
- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22678829, 09377680, 12219388, 16196060, 9377680, 12206740, 16217059, 16257276
- Part Description: 2004 Cadillac CTS Sensor, Fuel Tank Pressure
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
$48.11 MSRP:$98.40You Save: $50.29 (52%)
Delphi® Fuel Injection Pressure Regulator for 2004 Cadillac CTS
PartNumber: FP10379Product Specifications- Adjustable: No
- Inlet Port Diameter: 24.0 mm
- Inlet Quantity: 1
- Inlet Type: Push In
- Material: Metal
- Mounting Type: Clamp
- Outlet Quantity: 1
- Outlet Type: Returnless
- UPC: 689604291443
- Part Description: 2004 Cadillac CTS Fuel Injection Pressure Regulator
Vehicle Fitment- 2004 Cadillac CTS | All Trims | 6 Cyl 3.2L
$26.03
OEM (Genuine) 2004 Cadillac CTS Regulator, Fuel Pressure
PartNumber: 9158978
Product Specifications- Notes: Cts
- Other Names: Fuel Pressure Regulator
- Item Dimensions: 4.1 x 3.2 x 3.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Regulator, Fuel Pressure
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
FAQ for Fuel Pressure Regulator Repair
Q: What is the removal procedure for the fuel injectors and fuel rail?
A:
The procedure is to remove the intake plenum, remove the fuel rail brace bolt from the intake manifold, remove the bolts securing the fuel rail to the intake manifold, remove the retainers from the fuel injectors, remove the fuel injectors from the fuel rail, and then remove the O-ring seals from the fuel injectors.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the fuel injectors and fuel rail?
A:
The proper way is to install the new fuel injector O-ring seals onto the fuel injectors, install the fuel injectors to the fuel rail with the new retainer clips, install the fuel rail with the injectors to the intake manifold, install the bolts securing the fuel rail to the intake manifold, and then install the intake plenum.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel pressure regulator?
A:
The procedure is to remove the air inlet grill, place a shop towel under the fuel pressure regulator, disconnect the atmospheric vent hose from the fuel pressure regulator, remove the fuel pressure regulator clamp bolt, spread the clamp only enough to allow the fuel pressure regulator to be removed, and then twist while pulling outward to remove the fuel pressure regulator from the fuel rail.
By Bob
GM Specialist
29/10/2022Q: What should be noticed to reduce the risk of fire and personal injury?
A:
You should wrap a shop towel around the fuel pressure connection to reduce the risk of fire and personal injury. The towel will absorb any fuel leakage that occurs during the connection of the fuel pressure gauge. Place the towel in an approved container when the connection of the fuel pressure gauge is complete.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to install the fuel pressure regulator?
A:
The proper way is to apply a few drops of clean engine oil to the O-ring seals on the fuel pressure regulator, twist while pushing inward on the fuel pressure regulator, install the fuel pressure regulator clamp bolt, install the atmospheric vent hose, and then install the air inlet grill.
By Bob
GM Specialist
29/10/2022