< Back ×
My Vehicle Change Vehicle
2004 Cadillac CTS
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Brands
- Prices
Dorman® Engine Coolant Recovery Tank for 2004 Cadillac CTS
PartNumber: 603-099Product Specifications- Cap Maximum Pressure Rating: 15 PSI
- Cap Type: Spring Loaded Twist
- Color: Clear
- Height: 227 mm
- Length: 148 mm
- Material: Plastic
- Mount Hole Quantity: 3
- OE Part Number: 15075118, 25769371
- Pressurized: Yes
- UPC: 019495453239
- Part Description: 2004 Cadillac CTS Engine Coolant Recovery Tank
Vehicle Fitment- 2004 Cadillac CTS | All Trims | 6 Cyl 3.2L
- 2004 Cadillac CTS | All Trims | 8 Cyl 5.7L
- 2004 Cadillac CTS | All Trims | 6 Cyl 3.6L
$72.52
OEM (Genuine) 2004 Cadillac CTS Reservoir
PartNumber: 25769371
Product Specifications- Notes: Cts; Cts-V; 3.2 Liter; 3.6 & 2.8 Liter; 5.7 & 6.0 Liter
- Other Names: Reservoir, Reservoir Tank
- Item Dimensions: 15.3 x 11.2 x 10.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25757864, 25687420
- Part Description: 2004 Cadillac CTS Reservoir
Vehicle Fitment- 2004 Cadillac CTS | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
FAQ for Coolant Reservoir Repair
Q: What is the proper way to install the surge tank?
A:
The proper way is to install the surge tank, install the lower surge tank bolt, install the surge tank bolt, install the clutch master cylinder reservoir bolts, and then install the master cylinder nuts.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the surge tank?
A:
The procedure is to remove the upper surge tank bolt, remove the clutch master cylinder reservoir bolts, remove the master cylinder nuts, remove the lower surge tank bolt, remove the surge tank bolt at the air inlet grille, and then remove the surge tank.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the inlet surge tank hose/pipe?
A:
The procedure is to partially drain the cooling system, position J38185 to the clamp to remove the surge tank inlet hose from the surge tank, position J38185 to the clamp to remove the surge tank inlet hose from the radiator, disconnect the air intake duct hoses from the throttle body assembly, position J38185 to the clamp to remove the surge tank inlet hose from the throttle body assembly, and then remove the surge tank inlet hose from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the inlet surge tank hose/pipe?
A:
The proper way is to install the position J38185 to the clamp to connect the surge tank inlet hose to the throttle body assembly, connect the air intake duct hoses to the throttle body assembly, position J38185 to the clamp, connect the surge tank inlet hose to the radiator, position the surge tank inlet hose to the retaining feature of the air cleaner assembly, route the surge tank inlet hose under the hood assist rod support, position J38185 to the clamp, connect the surge tank inlet hose to the surge tank, and then fill the cooling system.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the outlet surge tank hose/pipe?
A:
The procedure is to remove the wiper motor module, remove the bolt securing the surge tank outlet pipe to the engine rear lift bracket, remove the bolt securing the surge tank outlet pipe to the vent housing, and then remove the surge tank outlet hose/pipe from the engine.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the outlet surge tank hose/pipe?
A:
The proper way is to position the surge tank outlet hose/pipe to the engine, connect the heated oxygen sensor connector to the bracket, position the J38185 to the clamp to connect the surge tank outlet hose to the surge tank, install the wiper motor module, and then fill the cooling system.
By Bob
GM Specialist
01/11/2022See more FAQs (1)