< Back ×
My Vehicle Change Vehicle
2004 Cadillac CTS
< Back to View All
ABS & Parking Brake
- Department
- Prices
OEM (Genuine) 2004 Cadillac CTS ABS Pump Assembly
PartNumber: 19244856
Product Specifications- Notes: Cts, W/Active Brake Cntr;Cts, W/O Active Brk Cntr; Cts; All; W/O Cts-V
- Other Names: ABS Pump Assembly, Modulator Valve
- Item Dimensions: 7.1 x 6.6 x 6.5 inches
- Item Weight: 5.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25757791
- Part Description: 2004 Cadillac CTS ABS Pump Assembly
Vehicle Fitment- 2004 Cadillac CTS | Base | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS
$113.55 MSRP:$146.81You Save: $33.26 (23%)OEM (Genuine) 2004 Cadillac CTS Valve Kit, Brake Pressure Mod
PartNumber: 89047800Product Specifications- Notes: Cts-V; Cts; All; W/Cts-V
- Other Names: ABS Pump Assembly, Modulator Valve
- Item Dimensions: 8.4 x 6.1 x 6.3 inches
- Item Weight: 6.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac CTS Valve Kit, Brake Pressure Mod
Vehicle Fitment- 2004 Cadillac CTS | V | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
FAQ for Abs Pump And Motor Assembly Repair
Q: What is the proper way to install the brake pressure modulator valve (BPMV) bracket?
A:
The proper way is to install the BPMV mounting bracket to the frame, install the 4 BPMV mounting nuts, and then install the brake pressure modulator valve to the BPMV bracket.
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the brake pressure modulator valve (BPMV) bracket?
A:
The procedure is to turn OFF the ignition, remove the Brake Pressure Modulator Valve (BPMV) from the frame, raise and support the vehicle, remove the 4 BPMV bracket to frame mounting bolts, and then remove the BPMV mounting bracket from the frame.
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the brake pressure modulator valve (BPMV)?
A:
The procedure is to remove the right front tire and wheel assembly, the front air deflector, the right front wheelhouse liner, the upper radiator support bracket, the 2 master cylinder brake pipes, the remaining wheel brake pipes, the front air deflector, the EBCM/BPMV assembly, the 4 EBCM to BPMV screws and the EBCM.
By Bob
GM Specialist
28/10/2022Q: What should be noticed about brake pressure modulator valve (BPMV) replacement?
A:
For safety reasons, the brake pressure modulator valve assembly must not be repaired, the complete unit must be replaced. Except for the EBCM, no screws on the brake pressure modulator valve assembly may be loosened. If screws are loosened, it will not be possible to get the brake circuits leak-tight and personal injury may result.
By Bob
GM Specialist
28/10/2022