< Back ×
My Vehicle Change Vehicle
2004 Buick Rendezvous
< Back to View All
Power Steering Pumps
- Department
- Prices
OEM (Genuine) 2004 Buick Rendezvous Hose Asm-P/S Fluid Cooling
PartNumber: 15777624
Product Specifications- Notes: 3.4 & 3.5 Liter, AWD; Aztek, Rendezvous; AWD; 3.4l
- Item Dimensions: 30.6 x 26.3 x 9.8 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26073959
- Part Description: 2004 Buick Rendezvous Hose Asm-P/S Fluid Cooling
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
OEM (Genuine) 2004 Buick Rendezvous Hose Asm-P/S Fluid Cooling
PartNumber: 15777623Product Specifications- Notes: 3.4 & 3.5 Liter, 2WD; Aztek, Rendezvous; 2WD
- Other Names: Cooling Pipe, Power Steering Oil Cooler
- Item Dimensions: 36.2 x 14.8 x 6.3 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26078270
- Part Description: 2004 Buick Rendezvous Hose Asm-P/S Fluid Cooling
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2004 Buick Rendezvous Hose Asm-P/S Fluid Cooling
PartNumber: 15818461
Product Specifications- Notes: 3.6 Liter; Aztek, Rendezvous; AWD; 3.6l
- Other Names: Power Steering Cooler, Power Steering Oil Cooler
- Item Dimensions: 28.5 x 26.0 x 11.2 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10313823
- Part Description: 2004 Buick Rendezvous Hose Asm-P/S Fluid Cooling
Vehicle Fitment- 2004 Buick Rendezvous | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
FAQ for Power Steering Cooler Repair
Q: How to remove the Power Steering Cooler Pipe/Hose?
A:
You need to raise and support the vehicle, remove the engine splash shield, and the power steering gear heat shield, next disconnect the cooler pipe low-pressure line from the power steering gear, disconnect the low-pressure hose from the cooler pipe, disconnect the wiring harness from the cooler bracket studs, then remove the cooler pipe bracket retaining studs and screws, and remove the cooler pipe.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Power Steering Cooler Pipe/Hose?
A:
You should install the cooler pipe, and the cooler pipe bracket retaining screws and studs, connect the wiring harness to the cooler bracket studs, and connect the low-pressure hose to the cooler pipe, then install the power steering gear heat shield, connect the cooler pipe low-pressure line to the power steering gear, and install the engine splash shield, lastly lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the cooler pipe bracket retaining screws?
A:
The recommended torque is 10 Nm (89-inch lbs.).
By Bob
GM Specialist
01/11/2022