< Back ×
My Vehicle Change Vehicle
2004 Buick Rendezvous
OEM (Genuine) 2004 Buick Rendezvous Cable Asm-Parking Brake Rear
PartNumber: 15796856
Product Specifications- Notes: Rendezvous; Left
- Other Names: Rear Cable
- Item Dimensions: 4.0 x 11.7 x 11.4 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10311316
- Part Description: 2004 Buick Rendezvous Cable Asm-Parking Brake Rear
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2004 Buick Rendezvous Cable Asm-Parking Brake Rear
PartNumber: 15796855Product Specifications- Notes: Rendezvous; Right
- Other Names: Rear Cable
- Item Dimensions: 14.0 x 13.8 x 3.3 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10311315
- Part Description: 2004 Buick Rendezvous Cable Asm-Parking Brake Rear
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2004 Buick Rendezvous Cable Asm-Parking Brake Front
PartNumber: 15808726Product Specifications- Notes: Rendezvous
- Other Names: Front Cable
- Item Dimensions: 18.5 x 18.0 x 2.9 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Buick Rendezvous Cable Asm-Parking Brake Front
Vehicle Fitment- 2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Parking Brake Cable Repair
Q: How to install the Park Brake Cable-Left Rear (Disc)?
A:
You need to install the park brake cable, install the park brake cable to the parking brake cable bracket, then install the park brake cable to the park brake actuator, install the rear park brake cable retaining nut and bolt, and install the parking brake left side cable to the park brake equalizer, then secure the park brake cable to the rear cross member with 2 rivets, and adjust the park brake cable, lastly lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: What kind of special tools will be required in the replacement of the Park Brake Cable-Left Rear (Drum)?
A:
The tools required include J37043 Park Brake Cable Release Tool.
By Bob
GM Specialist
02/11/2022Q: How to remove the park brake cable equalizer?
A:
You need to raise and support the vehicle, disconnect the left rear park brake cable and adjustment stud assembly from the equalizer assembly by removing the equalizer nut from the adjustment stud, then disconnect the front park brake cable from the right rear cable at the connector clip, then remove the equalizer assembly from the front park brake cable.
By Bob
GM Specialist
02/11/2022Q: How to install the Park Brake Cable-Front?
A:
You need to install the front park brake cable to the vehicle, install the park brake cable to the park brake lever, then install the park brake cable end to the park brake lever clevis, then raise and support the vehicle, and install the park brake cable clips to the parking brake cable shielded areas, install the park brake cable nuts to the underbody studs, install the park brake cable to the park brake cable guides and the park brake equalizer, then install the park brake cable end to the park brake cable connector, install the parking brake left side cable to the park brake equalizer. Then you can adjust the park brake cable, lower the vehicle, fold the carpet back in place, and install the left-side door sill plate, and the left-side instrument panel insulator.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the rear park brake cable retaining nut and bolt?
A:
The recommended torque is 10 Nm (89-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the park brake cable equalizer?
A:
You should install the equalizer assembly to the front park brake cable, connect the front park brake cable to the right rear cable at the connector clip, connect the left rear park brake cable and adjustment stud assembly to the equalizer assembly, then adjust the park brake system, then lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the park brake cable nuts?
A:
The recommended torque is 3 Nm (27-inch lbs.).
By Bob
GM Specialist
02/11/2022Q: How to remove the Park Brake Cable-Left Rear (Drum)?
A:
You need to release the park brake, raise and support the vehicle, then loosen the park brake cable equalizer nut to remove the park brake left side cable from the park brake equalizer, and remove the tire and wheel, the brake drum, then remove the park brake cable from the park brake actuator, finally use the J37043 to remove the park brake cable from the backing plate.
By Bob
GM Specialist
02/11/2022See more FAQs (3)