Part Description: 2004 Buick Rendezvous Handle Asm-Rear Side Door Outside
More Info
Vehicle Fitment
2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Exterior Door Handle Repair
Q: What is the proper way to install the door handle?
A:
The proper way is to install the outside door handle to the door handle rod, position the handle to the front door, install the new rivets to the outside door handle, connect the outside door handle rod-to-lock, install the water deflector, install the door trim panel and remove the tape from around the handle.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the door handle?
A:
You should place tape around the handle to protect the paint, remove the front door trim panel, remove the water deflector, disconnect the outside door handle rod-to-lock, remove the center of the rivets using a center punch, drill out the rivet from the front outside door handle, remove the outside door handle from the front door and remove the outside door handle from the door handle rod.
By Bob
GM Specialist
01/11/2022
Q: How do you disassemble the door handle?
A:
You can place tape around the handle to protect the paint, remove the trim panel, remove the water deflector, disconnect the outside door handle rod-to-lock, remove the center of the rivets, drill out the rivet from the outside door handle, remove the outside door handle from the rear door and remove the outside door handle from the door handle rod.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the front door hinge?
A:
You should position the front Door Hinge to the alignment marks, install the bolts to the body side door hinge, install the bolts to the door side door hinge, remove the support from the front door and inspect the door for proper operation and alignment.
Q: How to remove the Lock Actuator-Front Door?
A:
You need to remove the front door lock, then remove the front door lock to the front Door Lock Actuator screws, and remove the front door actuator from the front door lock.
Q: How do you install the door lock cylinder?
A:
You can install the lock cylinder rod to the front Door Lock Cylinder, install the front door lock cylinder, install the front door lock cylinder retainer, connect the front door lock cylinder rod to the front door lock and install the front door water deflector and the front door panel.