Part Description: 2004 Buick Rendezvous Stoplamp Switch
More Info
Vehicle Fitment
2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
$12.02MSRP: $23.70
You Save: $11.68 (50%)
FAQ for Brake Light Switches Repair
Q: How do you remove the stop lamp switch?
A:
You can remove the left-side instrument panel insulator, disconnect the electrical connectors and remove the stop lamp switch from the brake pedal bracket.
By Bob
GM Specialist
29/10/2022
Q: What should be noticed when servicing the stop lamp switch?
A:
Proper stop lamp switch adjustment is essential. Improper stop lamp switch adjustment may cause brake drag, heat buildup, and excessive brake lining wear.
By Bob
GM Specialist
29/10/2022
Q: What is the installation procedure for the stop lamp switch?
A:
You should install the stop lamp switch into the slotted grooves, connect the electrical connectors, install the left-side instrument panel insulator and adjust the stop lamp switch.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What should you do to avoid future misdiagnosis after programming?
A:
You should turn the ignition off for 10 seconds, connect the scan tool to the data link connector, turn the ignition on with the engine off, use the scan tool to retrieve history DTCs from all modules, and clear all history DTCs.
Q: How do you install the hazard and turn signal flasher?
A:
You can install the hazard and turn signal flasher into the fuse panel and install the fuse panel cover.