2004 Buick Rendezvous Brake Hose

You need to install the front park brake cable to the vehicle, install the park brake cable to the park brake lever, then install the park brake cable end to the park brake lever clevis, then raise and support the vehicle, and install the park brake cable clips to the Parking Brake Cable shielded areas, install the park brake cable nuts to the underbody studs, install the park brake cable to the park brake cable guides and the park brake equalizer, then install the park brake cable end to the park brake cable connector, install the parking brake left side cable to the park brake equalizer. Then you can adjust the park brake cable, lower the vehicle, fold the carpet back in place, and install the left-side door sill plate, and the left-side instrument panel insulator.

You should notice that the steering column must be in the lock position before disconnecting the steering column, the Steering Shaft coupling, the intermediate shaft, and the lower steering shaft.

You need to raise and support the vehicle, next use a utility stand to support the control arm forward of the coil spring, remove the control arm bolts from the rear axle, then use the utility stand to lower the rear axle enough to gain access to the Control Arm Bushing, mark the orientation of the control arm bushing in the lower control arm, finally remove the control arm bushing.