Part Description: 2004 Buick Rendezvous Refrigerant Temperature Sensor
More Info
Vehicle Fitment
2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Air Temperature Sensor Repair
Q: What is the proper way to install the intake air temperature sensor?
A:
The proper way is to install the IAT sensor by snapping it into place and then connect the IAT sensor electrical connector.
By Bob
GM Specialist
01/11/2022
Q: What kind of special tool will I need when servicing the ambient air temperature sensor?
A:
You will need a door trim pad clip remover.
By Bob
GM Specialist
01/11/2022
Q: How do you disassemble the intake air temperature sensor (IAT)?
A:
You can disconnect the intake air temperature sensor electrical connector, carefully grasp the sensor with a twisting and pulling motion, and remove the IAT sensor from the air intake duct.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the ambient air temperature sensor?
A:
You should install the ambient air temperature sensor on the wiring harness retainer, install the wiring harness push-in retainer and connect the electrical connector to the ambient air temperature sensor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the recommended torque for the accumulator cover bolts?
A:
The recommended torque is 12 Nm (106 inch lbs.).
Q: What is the recommended torque for the recirculation actuator mounting screws?