< Back ×
My Vehicle Change Vehicle
2003 Isuzu Ascender
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
Delphi® Fuel Pump Module Assembly for 2003 Isuzu Ascender
PartNumber: FG0411Product Specifications- Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 7
- Flow Rating: 16 gph
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: Yes
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Maximum Pressure: 65.0 PSI
- Outlet Outside Diameter: 0.375''
- Outlet Quantity: 2
- Outlet Type: Quick Connect
- Pump Type: Electric
- Regulator Included: No
- Resistance Ohms Empty: 40.0
- Resistance Ohms Full: 250.0
- Strainer Included: Yes
- System Pressure: 59 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604164006
- Vapor Pressure Sensor: No
- Voltage: 12.0 VDC
- Part Description: 2003 Isuzu Ascender Fuel Pump Module Assembly
Vehicle Fitment- 2003 Isuzu Ascender | All Trims | 6 Cyl 4.2L
- 2003 Isuzu Ascender | All Trims | 8 Cyl 5.3L
$205.18
Autobest® Fuel Pump Module Assembly for 2003 Isuzu Ascender
PartNumber: F2550AProduct Specifications- Notes: Internal Strainer Included;Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer and Tank Seal
- Average Current Draw(A): 5.8
- Average Flow Rating(GPH): 29
- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Rectangle
- Country of Orign: China
- Fuel Filter Included: No
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: NBR
- Grade Type: Performance
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: External and Internal
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 100
- Minimum Pump Pressure (PSI): 80
- Mounting Hardware Included: No
- Negative Ground: No
- Outlet Quantity: 1
- Outlet Size: 3/8
- Outlet Type: Quick Connect
- Product Height (in): 6.69
- Product Length (in): 9.06
- Product Width (in): 6.89
- Pump Type: Turbine
- Regulator Included: No
- Resistance Ohms Empty: 40
- Resistance Ohms Full: 250
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: PIN
- UPC: 00072845125507
- Voltage: 12V
- Weight (lbs): 2.19
- Wire Harness Included: No
- Part Description: 2003 Isuzu Ascender Fuel Pump Module Assembly
Vehicle Fitment- 2003 Isuzu Ascender | All Trims | 6 Cyl 4.2L
- 2003 Isuzu Ascender | All Trims | 8 Cyl 5.3L
$76.25
Airtex® In-Tank Fuel Pump Module Assembly for 2003 Isuzu Ascender
PartNumber: E3549MProduct Specifications- Gasket Included: Y
- Hazardous Material: No
- Inlet Count: 1
- Inlet Type: Strainer
- Item Grade: Standard Replacement
- Maximum Free Flow Rate (gph): 50
- Maximum Pressure Rate (psi): 100
- Minimum Free Flow Rate (gph): 40
- Minimum Pressure Rate (psi): 85
- Outlet Count: 1
- Outlet Size: 3/8"
- Outlet Type: Quick Connect
- Package Contents: Pump & Kit
- Package Quantity: 1
- UPC: 080044013501
- Warranty: Lifetime Limited Warranty
- Part Description: 2003 Isuzu Ascender In-Tank Fuel Pump Module Assembly
Vehicle Fitment- 2003 Isuzu Ascender | All Trims | 6 Cyl 4.2L
- 2003 Isuzu Ascender | All Trims | 8 Cyl 5.3L