2003 GMC Sierra 3500 Wheel Hub Bolt

Do not use a silicone-based adhesive, apply the Permatex(R) around the threads in a circular pattern, and apply a single bead across the threads approximately 10 mm (0.4 in) in length, 5 mm (0.2 in) in height and 5 mm (0.2 in) in width.

You can install the stud, the 4 washers, and the lug nut to the stud, tighten the lug nut, remove the lug nut and the washers, install the axle shaft for the vehicles, the rear hub assembly for the vehicles, the rear axle hub for vehicles with dual wheels, the rotor, except dual wheels, and the tire and wheel, and remove the safety stands.

You can raise and support the vehicle, remove the tire and wheel, the rotor, except dual wheel vehicles, the wheel stud from the axle flange using the J 43631, the axle shaft for vehicles with 9.5 in ring gear, the rear hub assembly, the rear axle hub, the wheel stud, the wheel stud, and place the hub and rotor assembly in a press to remove the wheel stud.