FAQ for Vehicle Speed Sensors Repair
Q: What is the recommended torque for the input speed sensor bolt?
A:
The recommended torque is 11 Nm (96-inch lbs.).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the VSS and O-ring seal?
A:
The recommended torque is 16 Nm (12 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the output speed sensor bolt?
A:
The recommended torque is 11 Nm (96-inch lbs.).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the VSS bolt?
A:
The recommended torque is 11 Nm (97-inch lbs.).
By BobGM Specialist
01/11/2022 Q: How to install the vehicle speed sensor?
A:
You can coat a new O-ring seal with a thin film of Synchro-mesh transmission fluid GM P/N 12345349 (Canadian P/N 10953465 or equivalent, install the VSS and O-ring seal, connect the VSS electrical connector and lower the vehicle.
By BobGM Specialist
01/11/2022 Q: How to remove the transmission speed sensor?
A:
You can raise and suitably support the vehicle, disconnect the output speed sensor electrical connector, remove the output speed sensor bolt, and the output speed sensor, and inspect the output speed sensor for any evidence of damage.
By BobGM Specialist
01/11/2022 Q: How to install the transmission speed sensor?
A:
You can lubricate the output speed sensor seal with automatic transmission fluid, install the output speed sensor, and the output speed sensor bolt, connect the output speed sensor electrical connector and lower the vehicle.
By BobGM Specialist
01/11/2022 Q: How to remove the vehicle speed sensor?
A:
You can raise and suitably support the vehicle, disconnect the Vehicle Speed Sensor (VSS) electrical connector, and remove the VSS and O-ring seal.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the VSS and bolt?
A:
The recommended torque is 10 Nm (89-inch lbs.).
By BobGM Specialist
01/11/2022 See more FAQs (4)