2003 GMC Sierra 3500 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
FAQ for Cigarette Lighters Repair
Q: How to install the accessory power receptacle?
A:
You can connect the electrical connector, insert the plastic ring, and the socket and install the power supply fuse.
By Bob
GM Specialist
29/10/2022
Q: How to remove the accessory power receptacle?
A:
You can remove the power supply fuse, and the electrical connector, lift up the front cover, insert the J 42059, and hold the plastic ring in place.
By Bob
GM Specialist
29/10/2022
Q: What is the repair procedure for the weather pack(r) connectors?
A:
The procedure is to separate the connector halves, open the secondary lock, grasp the wire and push the terminal, insert the weather pack(r) terminal removal tool, and inspect the terminal and connector.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How to remove the power seat switch?
A:
You can remove the Power Seat Switch bezel from the seat, the power seat switch to bezel screws, and the power seat switch.
Q: How to install the seat heater switch?
A:
You can install the front Seat Heater Switch assembly to the front trim panel by pressing the switch into place until the switch is completely seated, connect the electrical connector to the front seat heater switch assembly, and install the front trim panel.
Q: How to install the starter heat shield?
A:
You can install the Starter heat shield, the starter heat shield bolts and nut, the starter heat shield, and the starter motor.