FAQ for Air Temperature Sensor Repair
Q: What is the installation procedure for the ambient air temperature sensor?
A:
The procedure is to install the ambient air temperature sensor, and the park/turn signal and connect the electrical connector.
By BobGM Specialist
01/11/2022 Q: What is the recommended bolt torque for the intake air temperature (LAT) sensor?
A:
The recommended bolt torque is 7 N.m (62 lb in).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the air temperature sensor?
A:
The procedure is to disconnect the electrical connector and remove the lower left air temperature sensor.
By BobGM Specialist
01/11/2022 Q: How to install the intake air temperature (LAT) sensor?
A:
You can locate the airflow direction arrow on the MAF/IAT sensor, install the MAF/IAT sensor to the air cleaner assembly, connect the MAF/IAT sensor electrical connector, push in the gray CPA retainer, and install the air cleaner outlet duct.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the ambient air temperature sensor?
A:
The procedure is to remove the park/turn signal, and the ambient air temperature sensor and disconnect the electrical connector.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the air temperature sensor?
A:
The procedure is to install the lower left air temperature sensor and connect the electrical connector.
By BobGM Specialist
01/11/2022 Q: How to remove the intake air temperature (LAT) sensor?
A:
You can remove the air cleaner outlet duct, pull out the gray connector position assurance (CPA) retainer, push down on the black clip to disconnect the MAF/IAT sensor electrical connector, loosen the MAF/IAT clamp, and remove the MAF/IAT sensor from the air cleaner assembly.
By BobGM Specialist
01/11/2022 Q: How to remove the air temperature sensor-lower right?
A:
The procedure is to remove the I/P lower closeout panel, the right floor duct, the center console, and the lower right air temperature sensor and disconnect the electrical connector.
By BobGM Specialist
01/11/2022 Q: How to remove the air temperature sensor-upper right?
A:
The procedure is to remove the I/P upper trim panel and the upper right air temperature sensor and disconnect the electrical connector.
By BobGM Specialist
01/11/2022 Q: How to install the air temperature sensor-lower right?
A:
The procedure is to install the lower right air temperature sensor, the center console, the right floor duct, and the I/P lower closeout panel, and connect the electrical connector.
By BobGM Specialist
01/11/2022 See more FAQs (8)