FAQ for Wiper Blade Repair
Q: What should be noticed when installing the wiper blade element?
A:
You will need to keep the wiper blade claws in the rubber claw channel of the wiper blade element and not allow the claws of the wiper blade to contact the metal spline of the wiper blade element.
By BobGM Specialist
01/11/2022 Q: What's the installation procedure for the wiper arm blade?
A:
The installation procedure is to insert the hook of the wiper arm through the opening in the wiper blade, position the wiper blade pivot in the inside radius of the wiper arm hook, pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook, inspect for proper operation.
By BobGM Specialist
01/11/2022 Q: What's the installation procedure for the rear wiper arm blade?
A:
The installation procedure is to insert the hook of the rear wiper arm through the opening in the rear wiper blade, position the rear wiper blade pivot in the inside radius of the rear wiper arm hook, press the rear wiper blade pivot into the rear wiper arm hook until the pivot locks into the hook.
By BobGM Specialist
01/11/2022 Q: What's the removal procedure for the wiper arm blade?
A:
The removal procedure is to turn the ignition switch to the ACCY position, turn the wiper switch to the DELAY position, turn the ignition OFF when the wipers are in the inner wipe position and not moving, push the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm, bring the wiper arm out through the opening in the wiper blade.
By BobGM Specialist
01/11/2022 Q: What's the removal procedure for the rear wiper arm blade?
A:
The removal procedure is to push the button of the rear wiper blade clip and remove the rear wiper blade from the inside radius of the rear wiper arm, removing the rear wiper arm out through the opening in the rear wiper blade.
By BobGM Specialist
01/11/2022 Q: What's the removal procedure for the rear blade element?
A:
The removal procedure is to remove the rear wiper blade from the rear wiper arm, remove the rubber wiper element from the element vertebra, and remove the element vertebra and end cap from the rear wiper blade.
By BobGM Specialist
01/11/2022 Q: What's the proper way to install the wiper blade element?
A:
The proper way is to insert the open end of the wiper blade element into the bottom claws of the wiper blade, guide the wiper blade element through the wiper blade claw sets, engage the bottom claw of the wiper blade into the notches in the wiper blade element, install the wiper blade onto the wiper arm.
By BobGM Specialist
01/11/2022 Q: How do you clean the blade element?
A:
You can lift each blade assembly off of the windshield and clean the element with a cloth saturated with full-strength washer solvent then rinse the blade assemblies with clear water.
By BobGM Specialist
01/11/2022 Q: What's the installation procedure for the rear blade element?
A:
The installation procedure is to install the end cap on the rear wiper blade, install the new element into the rear wiper blade and the end cap until the inner claw set engages the vertebra notches, and install the rear wiper blade onto the rear wiper arm.
By BobGM Specialist
01/11/2022 See more FAQs (4)