Part Description: 2002 Buick Rendezvous Vehicle Speed Sensor
More Info
Vehicle Fitment
2002 Buick Rendezvous | All Trims | 6 Cyl 3.4L
$14.32
FAQ for Vehicle Speed Sensors Repair
Q: What conditions should be inspected for the input speed sensor?
A:
You should inspect the conditions including damaged or missing magnet, damaged housing, bent or missing electrical terminals, and damaged speed sensor clip.
By Bob
GM Specialist
01/11/2022
Q: How to remove the vehicle speed sensor (VSS)?
A:
You will need to raise and support the vehicle, disconnect the electrical connector at the VSS, and remove the retaining bolt and the sensor.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the retaining bolt?
A:
The recommended torque is 12 Nm (106-inch lbs.).
By Bob
GM Specialist
01/11/2022
Q: How to install the input speed sensor?
A:
You may need to install the input speed sensor and the input speed sensor clip into the case cover, connect the transaxle wiring harness and install the case side cover.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be done if there is movement between the metal plate of the transmission/transaxle mount and the transmission?
A:
You will need to tighten the Transmission Mount fasteners to the correct tightening specification.
Q: What materials should be inspected for the screen?
A:
Metal particles, clutch-facing material, rubber particles, and engine coolant should be inspected.
Q: What should be done before removing the automatic transmission oil cooler fitting?