FAQ for Transmission Mount Repair
Q: How do you remove the automatic transmission mount?
A:
You can remove the transaxle mount bracket, remove the transaxle mount lower nuts to the transaxle mount frame bracket, and remove the transaxle mount from the transaxle mount frame bracket.
By BobGM Specialist
01/11/2022 Q: What should be done when you install the transaxle mount bracket bolts?
A:
You will need to start with the forward lower bolt and work clockwise to tighten the transaxle mount bracket bolts to 95 Nm (70 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: What should be done before removing the automatic transmission brace?
A:
You will need to raise and support the vehicle.
By BobGM Specialist
01/11/2022 Q: What's the recommended torque for the transaxle mount upper nuts?
A:
The recommended torque is 47 Nm (35 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: What should be done if there is movement between the metal plate of the transmission/transaxle mount and the transmission?
A:
You will need to tighten the transmission mount fasteners to the correct tightening specification.
By BobGM Specialist
01/11/2022 Q: What's the recommended torque for the brace bolts installed on the engine and the transaxle?
A:
The recommended torque is 43 Nm (32 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: What should be noticed when you inspect the transmission mount?
A:
You will need to insert a block of wood that spans the width of the oil pan bottom between the oil pan and the jack support to avoid oil pan damage and possible engine failure.
By BobGM Specialist
01/11/2022 Q: What's the recommended torque for the transaxle mount lower nuts?
A:
The recommended torque is 47 Nm (35 ft. lbs.).
By BobGM Specialist
01/11/2022 See more FAQs (3)