< Back ×
My Vehicle Change Vehicle
2002 Buick Rendezvous
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2002 Buick Rendezvous Throttle Body Assembly
PartNumber: 12595275
Product Specifications- Notes: Aztek, Rendezvous
- Other Names: Throttle Body
- Item Dimensions: 7.8 x 5.7 x 5.9 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 17113631
- Part Description: 2002 Buick Rendezvous Throttle Body Assembly
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
FAQ for Throttle Body Repair
Q: What should be noticed when cleaning the gasket surfaces?
A:
You should not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as damage to the gasket surfaces and throttle body assembly may result, and use care in cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as sharp tools may damage the gasket surfaces.
By Bob
GM Specialist
02/11/2022Q: What should be noticed when cleaning the throttle body bore and the throttle valve plate?
A:
You should not use a cleaner that contains methyl ethyl ketone, because its extremely strong solvent may damage components and it is not necessary for this type of cleaning.
By Bob
GM Specialist
02/11/2022Q: What's the recommended torque for the throttle body retaining nuts and bolts?
A:
The recommended torque is 28 N.m (21 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What should be done before installing the snap retainer through the bulkhead?
A:
You will need to install the accelerator cable into the vehicle using the routing noted during removal.
By Bob
GM Specialist
02/11/2022Q: What should be done if the deposits are excessive?
A:
You may remove and disassemble the throttle body for cleaning.
By Bob
GM Specialist
02/11/2022Q: What should be done before disconnecting the accelerator cable from the accelerator pedal?
A:
You will need to remove the left instrument panel sound insulator.
By Bob
GM Specialist
02/11/2022Q: What's the recommended torque for the bolts and nuts?
A:
The recommended torque is 13 Nm (115 lb in) for the bolts and 10 Nm (89 lb in) for the nut.
By Bob
GM Specialist
02/11/2022Q: What's the proper way to install the accelerator cable bracket?
A:
The proper way is to position the accelerator cable bracket on the throttle body and then install the nut and bolts.
By Bob
GM Specialist
02/11/2022See more FAQs (3)