FAQ for Seat Cushion Pad Repair
Q: How to remove the rear seat cushion inner panel?
A:
You will need to remove the rear bucket seat, remove the rear screw and the front screw from the rear seat cushion trim cover, remove the rear seat belt buckle, and remove the rear seat cushion trim cover from the rear seat.
By BobGM Specialist
01/11/2022 Q: What should be done before installing the seat back cover to the front retainer at the side impact airbag?
A:
You will need to install the hook and the loop retainers, securing the front seat back cover to the pad.
By BobGM Specialist
01/11/2022 Q: What's the recommended torque for the rear seat cushion trim cover screw?
A:
The recommended torque is 40 N.m (30 lb-ft).
By BobGM Specialist
01/11/2022 Q: What's the proper way to remove the rear seat cushion's outer trim panel?
A:
The proper way is to remove the rear bucket seat, remove the rear screw from the rear seat cushion trim cover, remove the rear seat recliner handle, then remove the rear seat cushion trim cover from the rear seat.
By BobGM Specialist
01/11/2022 Q: What's the installation procedure for the front seat back frame?
A:
The installation procedure is to install the front seat lumbar to the front seat back if required, install the front seat back pad to the front seat back frame, and install the front seat back cushion cover, the front seat back, and the front seat.
By BobGM Specialist
01/11/2022 Q: What's the installation procedure for the rear seat back frame?
A:
The installation procedure is to install the rear seat back pad to the rear seat back frame, install the rear seat back cushion cover, the rear seat back, and the split bench seat.
By BobGM Specialist
01/11/2022 Q: What's the proper way to install the rear seat cushion trim panel?
A:
The proper way is to install the retainer slot on the rear seat cushion trim panel to tab on the recliner hinge, install the rear seat cushion trim panel by sliding down and seat it fully, and install the screw to the rear seat cushion trim panel.
By BobGM Specialist
01/11/2022 Q: What's the removal procedure for the front seat cushion?
A:
The removal procedure is to remove the front bucket seat and the front seat back, remove the front seat cushion cover from the front seat cushion, and remove the front seat cushion from the front seat frame.
By BobGM Specialist
01/11/2022 Q: What's the removal procedure for the rear seat back frame?
A:
The removal procedure is to remove the rear split bench seat, the rear seat back, and the rear seat back cushion cover, then remove the rear seat back pad from the rear seat back frame.
By BobGM Specialist
01/11/2022 Q: What should be done before installing the J-hook retainers on the sides of the front seat cushion cover?
A:
You will need to install the J-hook retainer on the front of the front seat cushion cover.
By BobGM Specialist
01/11/2022 See more FAQs (33)