Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;without Aftermarket Filtration Improvement;In-Line filter available;Supplied w/Reservoir
Aftermarket Filtration: Without
Attribute: With Reservoir
Hose Port: O-Ring
Housing Material: Cast Iron
Import or Domestic: Domestic
Mounting Hardware: Without
Power Steering Reservoir Cap: Without
Pulley: Without
Pulley Attachment Type: Press-on
Pump Inlet Attachment Type: Hose Barb
Pump Outlet Attachment Type: Threaded
Thread Size: M16 x 1.5
Part Description: 2002 Buick Rendezvous Remanufactured Power Steering Pump w/Reservoir
Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
Hose Port: O-Ring
Housing Material: Cast Iron
Import or Domestic: Domestic
Mounting Hardware: Without
Power Steering Reservoir Cap: Without
Pulley: Without
Pulley Attachment Type: Press-on
Pump Inlet Attachment Type: Hose Barb
Pump Outlet Attachment Type: Threaded
Reservoir: Without
Thread Size: M16 x 1.5
Part Description: 2002 Buick Rendezvous Remanufactured Power Steering Pump w/o Reservoir
Notes: Pulley needs to be transferred w/proper pulley removal/install toll.
UPC: 843613120983
Part Description: 2002 Buick Rendezvous Remanufactured Power Steering Pump
More Info
Vehicle Fitment
2002 Buick Rendezvous | All Trims | 6 Cyl 3.4L
FAQ for Power Steering Pump Repair
Q: How to remove the power steering pulley?
A:
You will need to remove the power steering pump from the engine for clearance, then remove the pump pulley.
By Bob
GM Specialist
01/11/2022
Q: What should be noticed when installing the power steering pulley?
A:
You will need to ensure that the face of the pulley hub is flush with the end of the pump shaft and do not use the arbor press to install the pulley.
By Bob
GM Specialist
01/11/2022
Q: What's the proper way to remove the power steering pump flow control valve?
A:
The proper way is to remove the 0-ring union fitting from the hydraulic pump housing assembly, remove the 0-ring seal from the 0-ring union fitting, and remove the control valve assembly and the flow control spring.
By Bob
GM Specialist
01/11/2022
Q: What should be done after removing the power steering pump pulley from the pump?
A:
You should remove the power steering pump reservoir from the power steering pump.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the 0-ring union fitting?
A:
The recommended torque is 75 Nm (55 ft. lbs.).
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the power steering pump mounting bolts?
A:
The recommended torque is 34 Nm (25 lb-ft).
By Bob
GM Specialist
01/11/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: What should be done before removing the reservoir clip?
A:
You will need to place the hydraulic pump on a fixed, flat surface, with the shaft facing upward, insert a screwdriver into the retaining clip tab, force the retaining clip tab outward, and slide the reservoir clip away from the hydraulic pump assembly.