< Back ×
My Vehicle Change Vehicle
2002 Buick Rendezvous
< Back to View All
Lift Supports
- Department
- Brands
- Prices
StrongArm® Liftgate Lift Support for 2002 Buick Rendezvous
PartNumber: 4992Product Specifications- Body: 22.00
- BODY CONNECTION: ball socket (nylon) 10mm
- Brackets: No
- Compressed Length: 17.96
- Extended Length: 28.87
- Force: 135.00
- Hardware Kit: No
- High Performance Item: N
- Internal Springs: No
- Is Application Specific: Y
- Material: Heavy gauge steel pressure tube provides long life; Rubber o-ring piston seal for controlled lift; Teflon backup ring gives enhanced performance
- Shaft: 10.00
- SHAFT CONNECTION: ball socket (nylon) 10mm
- Stroke: 10.91
- UPC: 043645724757
- Part Description: 2002 Buick Rendezvous Liftgate Lift Support
Vehicle Fitment- 2002 Buick Rendezvous | All Trims | All Engines
$18.14
OEM (Genuine) 2002 Buick Rendezvous Strut Asm-Lift Gate
PartNumber: 15801127
Product Specifications- Notes: Rendezvous; Right
- Location: Passenger Side
- Other Names: Lift Cylinder
- Item Dimensions: 30.6 x 1.9 x 1.0 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10324184, 15209977
- Part Description: 2002 Buick Rendezvous Strut Asm-Lift Gate
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2002 Buick Rendezvous Strut Asm-Lift Gate
PartNumber: 15801126
Product Specifications- Notes: Rendezvous; Left
- Location: Driver Side
- Other Names: Lift Cylinder
- Item Dimensions: 33.6 x 1.4 x 1.0 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10324183, 15209976
- Part Description: 2002 Buick Rendezvous Strut Asm-Lift Gate
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Liftgate Lift Support Repair
Q: What's the recommended torque for the end gate bolts when you install the bolts to the end gate torque rod to the end gate?
A:
The recommended torque is 33 N.m (28 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the end gate torque rod bolt when installing the end gate torque rod bolt to the torque rod bracket?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What's the removal procedure for the lift gate strut?
A:
The removal procedure is to open and support the liftgate, lift the retainer clips on the assist rods, remove the upper end of the assist rods from the ball joint, remove the lower end of the assist rods from the ball joint and remove the assist rods from the lift gate.
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the lift gate strut?
A:
The installation procedure is to position the assist rods to the lift gate, install the upper end of the assist rods to the ball joint and seat it, install the lower end of the assist rods to the ball joint, remove the support from the lift gate and close the lift gate.
By Bob
GM Specialist
01/11/2022