FAQ for Interior Door Handle Repair
Q: How do you remove the front side door handle?
A:
You can remove the front door trim panel, remove the front door water deflector, remove the center of the rivets using a center punch, drill out the rivet from the front inside door handle, remove the front inside door handle from the front door inner panel and remove the lock rod and door handle rod from the front inside door handle.
By BobGM Specialist
01/11/2022 Q: What's the recommended torque for the cook hook screw?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: What's the recommended torque for the assist handle bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By BobGM Specialist
01/11/2022 Q: How to install the I/P assist handle?
A:
You may need to install the assist handle to the instrument panel, the assist handle nuts, and the I/P cluster trim plate bezel.
By BobGM Specialist
01/11/2022 Q: What should be done before installing the rivet to the rear inside door handle?
A:
You will need to install the rear inside door handle by inserting the tabs into the rear door inner panel slots.
By BobGM Specialist
01/11/2022 Q: What's the recommended torque for the fasteners?
A:
The recommended torque is 3 N.m (27 lb in).
By BobGM Specialist
01/11/2022 Q: What's the removal procedure for the assist handle?
A:
The removal procedure is to remove the upper center pillar trim panel, remove the bolts from the assist handle, then remove the assist handle from the center pillar.
By BobGM Specialist
01/11/2022 Q: What's the proper way to install the cook hook?
A:
The proper way is to install the cook hook to the headliner and secure it with the cook hook screw.
By BobGM Specialist
01/11/2022 Q: What's the proper way to install the assist handle assembly and rear coat hook?
A:
The proper way is to connect the electrical connectors, install the bulb socket in the lamp assembly, position the pull handle, then install the fasteners.
By BobGM Specialist
01/11/2022 Q: What's the installation procedure for the front side door handle?
A:
The installation procedure is to install the front inside door handle by inserting the tabs into the rear door inner panel slots, install the lock rod and the door handle rod to the front inside door handle, install the rivet to the front inside door handle, install the water deflector to the front inside door handle, install the front door trim panel.
By BobGM Specialist
01/11/2022 See more FAQs (7)