Part Description: 2002 Buick Rendezvous Block Asm-Accessory Wiring Junction *Markprnt
More Info
Vehicle Fitment
2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
FAQ for Fuse Box Repair
Q: What's the recommended torque for the underhood accessory wiring junction block harness retaining bolts?
A:
The recommended torque is 4 N.m (36 lb in).
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the positive battery cable nut?
A:
The recommended torque is 16 N.m (12 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What's the installation procedure for the console electric center or junction block?
A:
The installation procedure is to install the BCM, install the console accessory wiring junction block into the console accessory wiring junction block bracket, secure the console accessory wiring junction block retainers, connect the console accessory wiring junction block electrical connectors, install the console accessory wiring junction block electrical connectors bolts finger tight until seated, connect the BCM electrical connectors, install the front floor console, connect the negative battery cable.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the console accessory wiring junction block electrical connectors bolts?
A:
The recommended torque is 6 N.m (54 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you remove the cruise control module?
A:
You can remove the cruise control cable from the module, disconnect the electrical connector, remove the mounting bracket bolt from the Cruise Control Module, and remove the cruise control module from the mounting bracket.
Q: What's the removal procedure for the power mirror switch?
A:
The removal procedure is to remove the switch plate from the front door trim panel, disconnect the electrical connectors from the switch plate, and remove the power Mirror Switch from the switch plate.
Q: What should be done before removing the power seat switch from the outer trim panel?
A:
You will need to use a small flat-bladed tool to release the retainers which hold the Power Seat Switch to the outer trim panel.