Part Description: 2002 Buick Rendezvous Fog Lamp Assembly
More Info
Vehicle Fitment
2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Fog Light Repair
Q: What's the installation procedure for the fog lamp switch?
A:
The installation procedure is to connect the electrical connector to the fog lamp switch, position the fog lamp switch to the retainers in the I/P carrier, install the fog lamp switch to the I/P carrier and seat it, and install the I/P cluster trim plate bezel.
By Bob
GM Specialist
01/11/2022
Q: How do you remove the fog lamp switch?
A:
You can remove the instrument panel (I/P) cluster trim plate bezel, release the retaining tabs from the I/P carrier, disconnect the electrical connector from the fog lamp switch, and remove the fog lamp switch.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you remove the cruise control module?
A:
You can remove the cruise control cable from the module, disconnect the electrical connector, remove the mounting bracket bolt from the Cruise Control Module, and remove the cruise control module from the mounting bracket.
Q: What's the removal procedure for the power mirror switch?
A:
The removal procedure is to remove the switch plate from the front door trim panel, disconnect the electrical connectors from the switch plate, and remove the power Mirror Switch from the switch plate.
Q: What should be done before removing the power seat switch from the outer trim panel?
A:
You will need to use a small flat-bladed tool to release the retainers which hold the Power Seat Switch to the outer trim panel.