Part Description: 2002 Buick Rendezvous Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2002 Buick Rendezvous | All Trims | All Engines
FAQ for Coolant Temperature Sensors Repair
Q: What's the recommended torque for the ECT sensor?
A:
The recommended torque is 20 N.m (15 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: How do you remove the ECT sensor?
A:
You can turn OFF the ignition, drain the coolant below the level of the engine coolant temperature (ECT) sensor, disconnect the sensor electrical connector, and carefully remove the ECT sensor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be done when you install the bolts to the front end sheet metal diagonal brace at the radiator support?
A:
You will need to tighten the front end sheet metal diagonal brace at Radiator support bolts to 10 N.m (89 lb in).
Q: How do you remove the coolant recovery reservoir?
A:
You can reposition the reservoir hose clamp at the radiator overflow fitting with J 38785, remove the reservoir hose at the radiator overflow fitting, and remove the reservoir mounting clip and the Coolant Reservoir.
Q: What's the recommended torque for the thermostat bypass pipe nut when installing the thermostat bypass pipe to the cylinder head nut?