< Back ×
My Vehicle Change Vehicle
2002 Buick Rendezvous
< Back to View All
Coil Springs
- Department
- Brands
- Prices
OEM (Genuine) 2002 Buick Rendezvous Rear Spring Assembly
PartNumber: 10412896
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Spring
- Item Dimensions: 14.8 x 8.9 x 9.0 inches
- Item Weight: 8.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Rendezvous Rear Spring Assembly
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Centric® Premium™ Coil Springs for 2002 Buick Rendezvous
PartNumber: 630.62135Product Specifications- UPC: 805890819837
- Part Description: 2002 Buick Rendezvous Premium™ Coil Springs
Vehicle Fitment- 2002 Buick Rendezvous | All Trims | All Engines
OEM (Genuine) 2002 Buick Rendezvous Front Coil Spring
PartNumber: 89060183
Product Specifications- Notes: Rendezvous
- Location: Driver Side; Passenger Side
- Other Names: Coil Spring, Spring
- Item Dimensions: 15.5 x 8.0 x 7.7 inches
- Item Weight: 9.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22196695
- Part Description: 2002 Buick Rendezvous Front Coil Spring
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Centric® Premium™ Coil Springs for 2002 Buick Rendezvous
PartNumber: 630.66114Product Specifications- Notes: w/AC
- UPC: 805890822530
- Part Description: 2002 Buick Rendezvous Premium™ Coil Springs
Vehicle Fitment- 2002 Buick Rendezvous | All Trims | All Engines
OEM (Genuine) 2002 Buick Rendezvous Rear Spring Assembly
PartNumber: 10412899
Product Specifications- Notes: Rendezvous
- Other Names: Coil Spring
- Item Dimensions: 14.4 x 6.6 x 6.2 inches
- Item Weight: 6.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Rendezvous Rear Spring Assembly
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Coil Springs Repair
Q: What should be done before removing the coil spring?
A:
You will need to raise and support the vehicle.
By Bob
GM Specialist
01/11/2022Q: What should be done before removing the front wheel drive with an axle coil spring?
A:
You can raise and support the vehicle.
By Bob
GM Specialist
01/11/2022Q: What should be done before removing the front wheel drive without the axle coil spring?
A:
You can raise and support the vehicle.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the strut shaft nut?
A:
The recommended torque is 85 N.m (63 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the front wheel drive with axle coil spring?
A:
The installation procedure is to install the springs and the insulators to the rear axle, use the utility stand to raise the rear axle, install the rear axle tie rod to the rear axle, install the shock absorbers to the rear axle, remove the utility stand, then lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the front wheel drive without an axle coil spring?
A:
The installation procedure is to install the springs, raise the lower control arm and load the suspension, connect the ball joint to the knuckle, install the stabilizer link to the lower control arm, support the lower control arm, install the ABS electrical connector mounting bracket, connect the ABS electrical connector, install the brake caliper mounting bracket, the parking brake cable mounting bracket, the brake calipers, and the wheel and tire assemblies, then lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the lower ball joint nut?
A:
The recommended torque is 85 N.m (63 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the prevailing torque type fastener?
A:
The recommended torque is 3 N.m (27-inch lbs.).
By Bob
GM Specialist
01/11/2022See more FAQs (3)