< Back ×
My Vehicle Change Vehicle
2002 Buick Rendezvous
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2002 Buick Rendezvous Impact Sensor
PartNumber: 10313521
Product Specifications- Location: Driver Side
- Other Names: Impact Sensor
- Item Dimensions: 3.4 x 3.2 x 3.2 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Rendezvous Impact Sensor
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
$23.17 MSRP:$34.97You Save: $11.80 (34%)OEM (Genuine) 2002 Buick Rendezvous Impact Sensor
PartNumber: 10313522Product Specifications- Location: Passenger Side
- Other Names: Impact Sensor
- Item Dimensions: 4.4 x 2.3 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Rendezvous Impact Sensor
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
$23.17 MSRP:$34.97You Save: $11.80 (34%)
OEM (Genuine) 2002 Buick Rendezvous Sensor Asm-Inflator Restraint Side Imp
PartNumber: 10317558
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 4.4 x 2.2 x 2.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Rendezvous Sensor Asm-Inflator Restraint Side Imp
Vehicle Fitment- 2002 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
FAQ for Air Bag Sensor Repair
Q: What's the recommended torque for the I/P bolts installed on the inflatable restraint module?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What's the proper way to install the inflatable restraint side impact module?
A:
The proper way is to install the driver-side airbag, and the airbag fasteners, pull the airbag wiring harness down into the seat cushion while guiding the harness through the wire triangle of the seat frame, install the harness retaining clips, and the seat back cover, connect the J-clip that is along the lower rear seat back, install the driver seat, enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What parts of a side-impact airbag need to be replaced if damaged?
A:
You will need to replace the seat cushion frame, the seat recliner (if equipped), the seat adjuster, and the seat back frame.
By Bob
GM Specialist
01/11/2022Q: What parts of the side airbag should be inspected for damage?
A:
You need to inspect the seat cushion frame, the seat recliner, the seat adjuster, and the seat back frame, and replace them if necessary.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the airbag fasteners?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the SDM mounting fasteners?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when you handle a sensor?
A:
You should not strike or jolt a sensor, and remove any dirt, grease, etc. from the mounting surface, position the sensor horizontally on the mounting surface, point the arrow on the sensor toward the front of the vehicle, tighten all of the sensor fasteners and sensor bracket fasteners to the specified torque value before applying power to a sensor.
By Bob
GM Specialist
01/11/2022Q: How many inflatable restraint side impact sensor fasteners need to be installed on the center pillar?
A:
Two inflatable restraint side impact sensor fasteners need to be installed.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the inflatable restraint side impact sensor fasteners?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the sensor bolts?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (6)